Used Creality Ender-3 S1/Ender-3 S1 Pro/Ender-3 S1 Plus 3D Printer DIY Printing

Description

Ender 3 S1
Features:
1.【"Sprite" Direct Dual-gear Extruder】: The "Sprite" is lighter and features less inertia and more precise positioning, supports PLA/TPU/PETG/ABS print filaments.
2.【CR Touch Automatic Bed Leveling】: 16-point automatic bed leveling technology saves you the trouble of manual leveling and makes leveling simple and easy.
3.【High-precision Dual Z-axis】: With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.
4.【PC Spring Steel Printing Platform】: The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, the model can be sticked to the platform or take off more easier.
5.【Power Loss Recovery and Filament Sensor】: Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
6.【Low-noise Design】: The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.
7.【Quick Assembling】: 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer simple and easy.
Specification:
"Sprite" Direct Dual-gear Extruder
CR Touch Automatic Bed Leveling
High-precision Dual Z-axis
PC Spring Steel Printing Platform
Power Loss Recovery and Filament Sensor
4.3-inch LCD Screen
Strong Expandability
Low-noise Design
Quick Assembling
Modeling Technology : FDM
Supported Filaments : PLA/TPU/PETG/ABS
Nozzle Diameter : 0.4mm
Machine Net Weight : 9.1kg
Type of Extruder: “Sprite" Direct Extruder
Resume Printing: supported
Mainboard : 32-bit silent mainboard
Supported File Format :  STL/OBJ/AMF
Build Size : 220*220*270mm
Printing Speed: 150mm/s at the maximum
Filament Diameter : 1.75mm
Extruder Gear ratio: 1:03.5
Automatic Bed Leveling: CR Touch
Rated Power: 350 W
Slicing Software : Creality Slicer/Cura/Repetier-Host/Simplify3D
Printer Size: 487*453*622mm
Printing Layer Thickness :0.05-0.35mm
Number of Nozzles:1
Package Gross Weight:11.2kg
Filament Sensor:supported
Rated Voltage : 115/230v 50/60Hz 4.5/2.5A
Software Language: Chinese/English
Package Size: 540*510*260mm
Printing Precision ±0.1mm
Printing Platform:PC spring steel sheet
Maximum Heatbed Temperature ：100°C
Screen：Knob color screen
Printing Method ：Type-C USB/SD card
Maximum Nozzle Temperature ：260°C
Ender 3 S1 Pro
The Ender 3 S1 Pro is a new and improved version of the very successful Ender 3. Equipped with a newly developed direct dual-gear extruder, automatic bed leveling, 32-bit silent mainboard, among other things, the S1-Pro is a very affordable printer with everything you could wish for at this price point.
Sprite Full-Metal Direct Drive Extruder with dual gear
Ender 3 s1 and Ender 3 S1 Pro use direct-drive extruders. The distance is shorter in a direct drive and the retraction too.   Ender-3 S1 Pro upgrade to full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments. especially the flexible TPU.
Up to 300℃ high-temp printing support multiple filaments.
It's compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
Spring Steel PEI Magnetic Build Plate
It can handle high temperatures a lot better than the one used in Ender 3 S1. You can easly remove it if you want since it gets attached to magnetics well. It is compatible with ASA, TPU, PLA, Wood, PETG, PAHT, SILK as well as other types of filaments. It removes all the small issues you have while printing. It trully takes no effort to take out the print -when printing is over, you simply bend the base and the model detaches itself from it.
Features of Ender-3 S1 Pro 3D Printer
Modeling Technology: FDM（Fused Deposition Modeling）
Build Volume: 220 x 220 x 270 mm
Machine Dimension: 490 x 455 x 625 mm
Net Weight: 8.6 kg
Printing Speed: 150mm/s at the maximum
Printing Precision: ±0.1 mm
Layer Height: 0.1-0.4 mm
Filament Diameter: 1.75 mm
Nozzle Temperature: Up to 300°C
Heat Bed Temperature: Up to 110°C
Build Surface: spring steel PEI
Extrusion Force: 80 N
Leveling Mode: CR Touch Automatic Leveling
Display: 4.3-inch color touch screen
Motherboard: 32-bit silent motherboard
Rated Voltage: 100-120V, 220-240V, 50/60 Hz
Data Transmission Method: Type-C USB/ SD card
3D File Format: .stl/.obj / .gcode(after slicing)
Supported Filament: PLA, ABS, PVA, Wood, TPU90-95, PETG, PA
Supported Language: Chinese, English, German, Spanish, French, Italian, Portuguese, Russian, and Turkish
Ender 3 S1 Plus
Modeling Technology: FDM（Fused Deposition Modeling）
Build Volume: 300*300*300mm
Machine Dimension: 557*535*655mm
Package Dimension: 625*590*230mm
Net Weight: 10.25kg
Gross Weight: 13.4kg
Printing Speed: maximum 100 mm/s
Printing Precision: 100mm±0.2mm
Layer Height: 0.1-0.4 mm
Filament Diameter: 1.75 mm
Nozzle Temperature: up to 260°C
Heat Bed Temperature: Up to 100°C
Build Surface: Spring steel PC magnetic build plate
Extrusion Force: 80 N
Leveling Mode: Auto-leveling with CR-Touch
Display: 4.3-inch color touch screen
Motherboard: 32-bit silent motherboard
Rated Voltage: 100-120V, 220-240V, 50/60 Hz
Data Transmission Method: Type-C USB/ SD card
3D File Format: STL/OBJ/AMF
Supported Filament: PLA/ABS/TPU/PETG
Supported Language: Chinese, English, Spanish, German, French, Portuguese, Italian,Russian and Turkish
Nozzle Quantity: 1
Nozzle Diameter: 0.4 mm
Extruder: "Sprite" Full-metal Dual-gear Direct Extruder
Resume Printing: Yes
Filament Sensor: Yes
Rated Power: 350W/24V
Slicing Software: Creality Slicer/Cura/Repetier-Host/Simplify3D
Features:
The Ender 3 S1 Pro is a new and improved version of the very successful Ender 3. Equipped with a newly developed direct dual-gear extruder, automatic bed leveling, 32-bit silent mainboard, among other things, the S1-Pro is a very affordable printer with everything you could wish for at this price point.
Sprite Full-Metal Direct Drive Extruder with dual gear
Ender 3 s1 and Ender 3 S1 Pro use direct-drive extruders. The distance is shorter in a direct drive and the retraction too.   Ender-3 S1 Pro upgrade to full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments. especially the flexible TPU.
Up to 300℃ high-temp printing support multiple filaments.
It's compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
Spring Steel PEI Magnetic Build Plate
It can handle high temperatures a lot better than the one used in Ender 3 S1. You can easly remove it if you want since it gets attached to magnetics well. It is compatible with ASA, TPU, PLA, Wood, PETG, PAHT, SILK as well as other types of filaments. It removes all the small issues you have while printing. It trully takes no effort to take out the print -when printing is over, you simply bend the base and the model detaches itself from it.