BEGO VarseoSmile Crown Plus - 3D Printing Dental Resin - Permanent Crowns 250g

Description

The tooth-colored ceramic filled hybrid material for 3D printing of permanent single crowns, inlays, onlays, and veneers
Advantages for the laboratory
Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time
High dimensional stability and strength of the printed objects due to high values of flexural strength and flexural modulus – therefore precise fit
Minimized resin sedimentation for easy handling, no mixing or shaking necessary with regular use
Easy to grind and polish by using standard tools
Seven shades according to the proven VITA* classical shades:
A1, A2, A3, B1, B3, C2, D3
Satisfies all the requirements for a Class IIa** medical device
Advantages for the patient
Excellent aesthetics thanks to a balanced ratio of opacity and translucency
Low tendency to age and discolor thanks to very low water absorption
Low plaque accumilation due to smooth surface
High comfort thanks to low cold and heat sensitivity
Antagonist-friendly material with mechanical buffering effect – ideal for implant-supported crowns
Minimized formation of secondary caries thanks to a high adhesive bond with luting composites
High biocompatibility due to very low water solubility – therefore not cytotoxic, not genotoxic, not toxic, not irritating, and not sensitizing
Individualization with stains
The individualization of the post-cured objects is possible with composite stains and is the responsibility of the user. Follow manufacturer‘s instructions.
Note for practitioners
VarseoSmile Crown
plus
can be attached using self-adhesive cements (e. g. RelyX Unicem*, 3M Espe*) or composite cement with a primer (e. g. Variolink Esthetic DC* and Monobond Plus*, Ivoclar Vivadent*). Observe the instructions for use of the luting agent.
Light-curing
The light polymerization can be achieved with the BEGO Otoflash (two xenon stroboscopic lamps, flash frequency 10 Hz, light spectrum 300 – 700 nm) or with the HiLite Power*, Fa. Heraeus Kulzer* (one xenon stroboscope lamp, flash frequency 20 Hz, light spectrum 390 – 540 nm).
Product details
Color
A1, A2, A3, B1
Density
approx. 1.4 – 1.5 g/cm³
Layer thickness
50 μm
Viscosity
2,500 – 6,000 MPa*s
Flexural strength
116 MPa
Wavelength
405 nm