1PCS T-8280 Preheating Oven infrared preheating station Brand New

Description

Ashley Automation
1PCS T-8280 Preheating Oven infrared preheating station Brand New
Products Features:
1. This machine selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely.
2. T-8280 can achieve to heat PCB board and component which contains lead or not
，
especially for the BGA and SMD parts.
3. Use infrared heat, easy to cut through, heat proportion, don’t have sirocco flow. Don’t shift the small components on the PCB board
，
ensure the welding quality.
4. This machine has 600W heating system, widely to 280x270mm.Can use together with the handhold infrared welder T-835.
5. Easily operate, you can operate it through easy training.
Technical Parameter:
Work bench size
410x316mm
Rated voltage and frequency
AC220-230v/AC110V
Complete machine power
1600W
Preheating plate power
1500W
Preheating plate size
280x270mm
Preheating plate temperature adjustable
0-450
℃
Main Components:
Preheating plate main body
1
Temperature sensor
1
PCB board holder
1
Power line
1
User manual (compact disc)
1
Main
component
function
explanation
：
Operation instructions
：
1. Inspect the machine and then open it
① Check the connection of the power line.
② Turn on the power switch. Allow the T-8280 Power-On-Self-Test (POST) to complete. After this, Temperature set-points will display last value used.
③The black switch on the front panel are used to control the infrared preheating plate; press the blue button “
▲
”(up)
，
the red button“
▼
”(down), can adjust the infrared preheating plate temperature between 0 ℃ and  450℃. Press the button“ON”
，
the infrared preheating plate starts to work, press“OFF”
，
it stops working.
2. Operation of preheating PCB board
(1) The placement and adjustment of the PCB board
：
① According to the size of the PCB board, adjust the PCB board holder, then put the PCB board and fix the adjust knob.
②According to the size of PCB board and welding technological requirement, press the blue button “
▲
”(up)and the red button  “
▼
” (down), regulate the output temperature of preheating plate between 0℃ and 450℃
(2) Preheating open and close:
① Press the “ON” button
，
open the preheating plate about 3-5 minutes, make the temperature be the setting value then carry on the next step .
② Finishing, press “OFF”, the preheating plate stops working.
Attention
：
Don’t close the power switch until the machine full cooling.
③The preheating temperature set: If the PCB board contains lead, adjust the infrared preheating plate temperature to 100-120℃; if not, adjust to 120-140℃. You can also set the preheating temperature according to the user’s experience and technology.
3. Machine installation and adjustment:
The preheating plate heating type includes: the total pressure flow-through heating way and the PID percentage adjustment way. You can adjust it according to the preheating allowance. Generally speaking, if the preheating temperature is lower than 250 ℃ , selects the PID percentage adjustment method; and if the preheating temperature is higher than 250℃, use the total pressure flow-through heating way.
Adjustment method
：
1. Press “
▲
”power-on, display: C=?
2. Press “
▲
”choose 0 or 1,every press the status change one time,
C=0 is PID percentage adjustment, C=1 is switching control.
3. Press “
▼
”OK
Cautions!
1. After finishing, don’t turn off the power immediately; make sure the infrared preheating plate complete cooling.
2. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly!
3. The high temperature operation, pay attention, avoid scalding.
4. If you don’t use the machine for a long time, you’d better pull off the power source plug!
Notice: Because,the international air shipping forbid to ship liquid,powder and batteries, If you purchased goods containing such items, we will not be putting them packing. Thank you for your support.
SALES POLICY:
Your bid is a contract - Place a bid only if you're serious about buying the item. If you are the winning bidder, you will enter into a legally biding contract to purchase the item. If payment is not received within 7 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion.
RETURN POLICY :
We offer 90 days(used) or 180 days(new) free warranty (except consumables).we stand behind every product we sell.If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase. For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, packaging, and all accessories.Shipping and handling charges are not refundable.
International Buyers:
VAT (Value-Added Tax) is buyer's responsibility. However, we will try our best to minimize it.
About US:
We are professional EBAY sales team and lots of ebay buyers very satisfied with our services.You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here.
payment :
Shipping :
Click the link above to check out our eBay store.
Best
Customer Service
Prompt
Delivery
100% Money Back
Guarantee
Easy & Secure
Payments
Copyright 2018 Ashley Automation. All rights reserved.
On Nov-21-20 at 00:11:10 PST, seller added the following information: